Cyberpunk 2077 FPS estimator
Rough estimateScores are PassMark G3D averages. Not listed? Choose “My GPU is not listed” and type its score from videocardbenchmark.net.
Please read: CD Projekt Red publishes FPS targets, and we use them as our starting point: a GeForce RTX 2060 Super reaches 60 FPS at 1080p on High, and ray tracing Ultra at 1080p and 60 FPS needs an RTX 3080 Ti. The way we scale to other cards is our own assumption. This tool does not model DLSS, FSR or frame generation, and the game also needs a strong processor and 8 GB or more of video memory for the higher tiers.
How this estimate is calculated
1. CD Projekt Red lists an official FPS target for each tier. Its Recommended tier is 60 FPS at 1080p on High with a GeForce RTX 2060 Super or Radeon RX 5700 XT, so we assume an RTX 2060 Super (PassMark G3D 16,482) reaches 60 FPS in that setup.
2. Your result is 60 FPS multiplied by (your PassMark G3D score / 16,482).
3. Resolution: we use the pixel ratio to the power of -0.85, because the game is mostly limited by the graphics card. Quality: Low x1.3, Medium x1.15, High x1.0, Ultra x0.85. These are assumptions.
4. Ray tracing: the RT Ultra target is 60 FPS at 1080p with an RTX 3080 Ti (G3D 27,164), so RT Ultra uses x0.607 (16,482 / 27,164). RT Low uses an assumed x0.8.
5. The range shown is the estimate plus or minus 30 percent. Results for older cards can be optimistic: the official minimum, a GTX 1060 on Low at 1080p, targets only 30 FPS.
Formula: FPS = 60 x (your score / 16,482) x resolution factor x quality factor
Sources: CD Projekt Red system requirements, GameSpot, isitbottlenecked.com and PassMark. Last updated: November 16, 2026.
Can my PC or laptop run Cyberpunk 2077?
If you have a GeForce GTX 1060 6 GB or a Radeon RX 580 8 GB, you meet the official minimum for 1080p on Low at 30 FPS. For 60 FPS at 1080p on High, CD Projekt Red recommends a GeForce RTX 2060 Super or Radeon RX 5700 XT. The calculator above turns your graphics card, resolution and quality setting into a rough FPS estimate, with ray tracing options too.
Cyberpunk 2077 system requirements
These targets apply to both the base game and Phantom Liberty, from Update 2.0 on. They come from CD Projekt Red, with some rows taken from GameSpot and isitbottlenecked.com. Ray tracing Low has its own target: 1080p at 30 FPS with a GeForce RTX 2060, Radeon RX 6800 XT or Arc A750.
| Minimum | Recommended | Ray tracing Ultra | Ray tracing Overdrive | |
|---|---|---|---|---|
| Target | 1080p Low, 30 FPS | 1080p High, 60 FPS | 1080p, 60 FPS | 4K, 60 FPS (with DLSS Frame Generation) |
| Processor | Core i7-6700 or Ryzen 5 1600 | Core i7-12700 or Ryzen 7 7800X3D | Core i9-12900 or Ryzen 9 7900X | Core i9-12900 or Ryzen 9 7900X |
| Graphics card | GTX 1060 6 GB, RX 580 8 GB or Arc A380 | RTX 2060 Super or RX 5700 XT | RTX 3080 Ti or RX 7900 XTX | RTX 4080 |
| VRAM | 6 GB | 8 GB | 12 GB | 16 GB |
| RAM | 12 GB | 16 GB | 20 GB | 24 GB |
| Storage | 70 GB SSD | 70 GB SSD | 70 GB NVMe | 70 GB NVMe |
Estimated FPS by graphics card
These numbers come from the calculator above, without DLSS, FSR or frame generation. They are rough estimates, and the real range can be about 30 percent higher or lower.
| Graphics | PassMark score | 1080p, High | 1440p, High | 1080p, RT Ultra |
|---|---|---|---|---|
| Radeon RX 580 (8 GB model) | 8,835 | 32 | 20 | 20 |
| GeForce GTX 1060 (6 GB) | 10,080 | 37 | 23 | 22 |
| GeForce GTX 1660 (6 GB) | 11,636 | 42 | 26 | 26 |
| GeForce RTX 2060 | 14,123 | 51 | 32 | 31 |
| GeForce RTX 2060 SUPER | 16,482 | 60 | 37 | 36 |
| GeForce RTX 3060 12GB | 16,861 | 61 | 38 | 37 |
| GeForce RTX 4060 | 19,883 | 72 | 44 | 44 |
| GeForce RTX 3060 Ti | 20,545 | 75 | 46 | 45 |
| GeForce RTX 3070 | 22,410 | 82 | 50 | 50 |
| GeForce RTX 4070 | 26,900 | 98 | 60 | 59 |
| GeForce RTX 3080 Ti | 27,164 | 99 | 61 | 60 |
| GeForce RTX 4080 | 34,639 | 126 | 77 | 77 |
The table starts from CD Projekt Red’s Recommended target, 60 FPS at 1080p on High with an RTX 2060 Super, and scales the other cards from there. CD Projekt Red lists an official minimum of only 30 FPS for a GTX 1060 on Low, so older cards may do worse than our estimate.
How to get more FPS in Cyberpunk 2077
- Turn ray tracing off. It is the biggest single cost. The RT Ultra target needs an RTX 3080 Ti, while the non-RT Recommended target needs an RTX 2060 Super.
- Lower the graphics preset or the resolution.
- Use upscaling such as DLSS, FSR or XeSS if your card supports it. This calculator does not include it, so you may get more FPS than shown.
- Install the game on an SSD. The official minimum already lists one.
- Update your graphics driver and the game.
- Plug in your laptop and use a high performance power mode.
Frequently asked questions
How much VRAM does Cyberpunk 2077 need?
The official tiers list 6 GB at minimum, 8 GB for Recommended and ray tracing Low, 12 GB for ray tracing Ultra and 16 GB for ray tracing Overdrive.
How much RAM does Cyberpunk 2077 need?
The minimum is 12 GB, and the Recommended tier lists 16 GB. The ray tracing Ultra and Overdrive tiers list 20 GB and 24 GB.
Does the processor matter?
Yes. CD Projekt Red notes that the game is both graphics and processor intensive, and its Recommended tier lists a Core i7-12700 or Ryzen 7 7800X3D. A weak processor can lower your FPS, even with a strong graphics card.
Can I play Cyberpunk 2077 on a hard drive?
The official minimum lists a 70 GB SSD, so an SSD is the supported option.
How accurate is this calculator?
It is a rough estimate with a plus or minus 30 percent range. We start from CD Projekt Red’s published targets, but the way we scale to other cards is our own assumption, and it does not model DLSS, FSR or frame generation.
More FPS calculators
Check how a game runs on your PC or laptop. All numbers are estimates, and each page explains its method.
