Phantom Blade Zero launched on October 29, 2026, and many players are asking if their PC or laptop can run it. Pick desktop PC or laptop, choose your graphics card, CPU and RAM, and get an estimate for native resolution. The result also checks your parts against the system requirements on the game’s Steam page.
Phantom Blade Zero FPS estimator
Estimate onlyScores are PassMark G3D averages. Not listed (for example GTX 1660 or RX 6700 XT)? Choose “My GPU is not listed” and type its score from videocardbenchmark.net.
Native vs upscaling: this estimate is for native resolution, without DLSS, FSR or XeSS. The developer’s own targets (1080p at 30 FPS and 1440p at 60 FPS) assume upscaling is on, so turning it on can give you noticeably more FPS than shown here. Ray tracing and path tracing are not included.
How this estimate is calculated
1. We start from a published test: Wccftech (Core i9-13900K, native resolution, Ultra preset) reports that 60 FPS at 1440p is reached by cards such as the RTX 5070 Ti and RX 9070 XT, and above. We use the Radeon RX 9070 XT = 60 FPS at native 1440p on Ultra. That is a threshold, so it is a safe floor, not an exact average.
2. Your result is that point multiplied by (your PassMark G3D score / the RX 9070 XT’s score of 26,913). Laptop and desktop cards use the same method.
3. Resolution: we use the pixel ratio to the power of -0.7. This fits DSOGaming’s RTX 5090 test, where FPS fell from about 46 at native 1440p to about 26 at native 4K (with path tracing).
4. Preset (Ultra is the reference): Very High x1.07, High x1.26 and Medium x1.46 come from Wccftech’s reported drops between presets. Low x1.9 comes from DSOGaming’s RTX 5090 test (about 100 FPS on Low and 65+ on High at 4K). Low and Medium are the least certain.
5. The range shown is the estimate plus or minus 30 percent, because the game’s performance changes with the scene and the CPU.
6. The RAM, video memory and CPU checks compare your choices with the system requirements on the game’s Steam page. They do not change the FPS number.
Formula: FPS = 89.8 x (your score / 26,913) x resolution factor x preset factor (89.8 is the 1080p equivalent of 60 FPS at 1440p).
The estimate does not include upscaling, frame generation, ray tracing or path tracing. Sources: Wccftech benchmarks, DSOGaming analysis, Steam page and PassMark. Last updated: November 7, 2026.
Phantom Blade Zero system requirements
- Minimum: Core i7-8700K or Ryzen 5 3600, 16 GB of RAM, and a GTX 1660 (6 GB) or RX 5500 XT (8 GB).
- Recommended: Core i5-10600K or Ryzen 5 5600X, 16 GB of RAM, and an RTX 3060 Ti (8 GB) or RX 6700 XT (12 GB).
- The game needs about 145 GB of free space, and an SSD is listed as required.
- The developer own targets are 1080p at 30 FPS for the minimum and 1440p at 60 FPS for the recommended spec, with up-scaling turned on. See the Steam store page for the latest numbers.
Upscaling changes the numbers
Our estimate is for native resolution. DLSS, FSR and XeSS render the game at a lower internal resolution, so they can raise your FPS a lot. If you are close to 60 FPS, try upscaling on Quality before lowering your settings.
FAQ
- Can a GTX 1660 run Phantom Blade Zero? It is the listed minimum card, aimed at 1080p and 30 FPS with upscaling on.
- Does it need 16 GB of RAM? Yes, 16 GB is listed for both the minimum and recommended specs.
- How accurate is this? It is a rough estimate with a plus or minus 30% range, based on one published test.
- Does it include ray tracing? No. Ray tracing and path tracing need much stronger cards.